SL-112SF Flow Switch
There are two resistors in the enclosed probe based
on the thermal principle.One of them is heated as the
detection resistor and the other is not heated. As the
reference resistance, when the medium flows, the
heat on the heating resistor is taken away.The
resistance value is changed, the two resistance
differences are used as the basis for judging the flow
rate
-
Security policy of Spare-link
-
Delivery policy of spare-link
-
Return policy spare-link
|
Specification |
1...150cm/s(Water),3...300cm/s(Oil),20...2000cm/s(Gas) |
|
Setting Range |
PNP,NPN,Relay Type,NO+NC |
|
Signal output |
24V±20%DC or 230V±15%DC |
|
Power Supply |
Max 400mA(PNP,NPN);Max 1A@24V ac/dc (Relay Type) |
|
Turn on current |
Max 80mA |
|
No-load current |
LED (6pcs) |
|
Flow indication |
Potentiometer Setting |
|
Setting Type |
100bar |
|
Proof Pressure Range |
≤4?/s |
|
Medium temperature change |
1--13s,Typical value 2s |
|
Initializtion time |
About 8s |
|
Electrical protection |
Reverse, short circuit, overload protection |
|
Protection level |
IP67 |
|
Medium temperature |
-20~80°C |
|
Ambient temperature |
-20~80°C |
|
Storage temperature |
20~100°C |
|
Connection mode |
M12 Socket Connector |
|
Material |
Probe: stainless steel?Housing: PBT |
|
Weight |
About 0.4kg |
DEV-SL-112SF
There are two resistors in the enclosed probe based
on the thermal principle.One of them is heated as the
detection resistor and the other is not heated. As the
reference resistance, when the medium flows, the
heat on the heating resistor is taken away.The
resistance value is changed, the two resistance
differences are used as the basis for judging the flow
rate